surfer girls holds her surf longboard on the beach

Beginner’s Guide to Buying a Longboard

Quick answer: For your first longboard, look for a wide, stable board: around 9'6" long and 23 inches wide, with soft, full rails and only a little rocker. A soft top or a traditional log is the best type for beginners, while high-performance longboards suit more advanced surfers. Then choose the material (polyurethane, epoxy or balsa) that fits how and where you surf.

If you often find yourself daydreaming about gliding along a rolling wave in your surf bikini, you're not alone. Longboarding isn't a choice, it's a lifestyle. It lures you in the moment you set your eyes on those riders who effortlessly slide along perfectly formed waves, floating back and forth along their boards. They glide along each wave with what seems like minimal exertion, effortless style and understated confidence.

Wait. Reality check! That's not you… just yet.

If surfing a spot like Batu Bolong in Canggu, Bali is on your bucket list, you'll need a delectable longboard to eventually get you there. Batu Bolong is what longboard dreams are made of; all you need is your one-piece surf swimsuit, your longboard and your eager determination.

While dreams do come true, you'll need to take one step back and start with your longboard selection. If you're a novice when it comes to longboard quiver knowledge, don't fear: we've got everything you need to know right here. And if you are shopping on the island, read our guide on where to buy a longboard in Bali.

A row of longboard surfboards

Longboard types at a glance

Type Best for Good to know
Soft top ("foamie") Beginners Soft foam, super buoyant, easy to paddle and built to last
Traditional log Beginners, mellow point breaks and softer days Heavier, with subtle rails; stable for walking and noseriding
High-performance longboard More advanced surfers Narrower nose and sharp tail, built for speed

Longboard materials

The most common materials used to make longboards are polyurethane, epoxy and balsa.

Polyurethane (PU)

Polyurethane foam with a balsa stringer, covered in fiberglass, produces a "snappy" board at first, but these boards tend to become less lively with use. The weight and durability of a PU longboard depend on the number of stringers and the amount of glass used in production.

Cross-section of a polyurethane (PU) surfboard showing the interior and exterior
Source: Surf Shops Australia

Epoxy

Epoxy is the lightest board in the water and more durable than PU, so an epoxy longboard means fewer ding repairs. However, many surfers feel that epoxy boards are too light and don't work well in windy conditions, so keep that in mind.

Cross-section of an epoxy surfboard showing the interior and exterior
Source: Tactics

Balsa

Balsa is a traditional construction material that has been used for decades. It is a wood with a high strength-to-weight ratio, as well as flex properties. Balsa longboards can be solid wood or hollow and are often preferred because they perform well, especially in choppy conditions. You can add a balsa longboard to your growing bucket list.

Longboard surfboard made of balsa wood
Source: Kuntiqi

Types of longboards

Next, we have the different types of surf longboards, and of course you need to get to know them well.

Different types of surf longboards

The three main types of longboards out there are the high-performance longboard for the more advanced surfer, and the traditional longboard (the log) and the soft top for beginners.

Traditional log

The log has more subtle rails and bottom contours than high-performance boards. Logs are typically made with heavier fiberglass, which carries momentum through flatter sections and gives you more stability for walking and noseriding. They're perfect for long, mellow point breaks or softer days.

A traditional longboard log, usually heavier, thicker and wider
Source: McTavish

Soft top surfboards

Soft tops are made from a softer foam material; they're super buoyant, easy to paddle and built to last. Ideal for beginner surfers, they make it so much easier to stand up and catch waves in all types of conditions. You'll feel the stoke right away.

A soft top longboard, commonly called a foamie
Source: Aquatic Hero

Let's face it, it's hard to escape a nosedive or two when you're first learning to surf. Don't stress! Your soft top will make the landing that much softer if it happens to hit you in the noggin. Straighten up your recycled lycra surf bikini and jump back on your board.

Longboard shapes

Lastly, consider the shape of your longboard. The three-dimensional shape and surface features determine how a longboard performs in the water. Here is what you need to know.

Examples of surf longboard shapes
Source: REAL Watersports

Nose and tail

The tip and end of the surfboard. A flat, blunt nose and a squarer tail are ideal for noseriding; tails that produce drag slow the board down to keep you in the sweet spot of the wave for longer. Longboards with a narrower nose and sharp tail are high-performance and built for speed. Add this to the bucket list too.

Dimensions

The length and width of the surfboard. The general rule of thumb is that the narrower and straighter the longboard, the faster it will be and the more suited it is to bigger waves. A rounder, curvier shape will tend to be slower but more maneuverable.

Pro tip: check out this longboard size guide to find the best board for you.

Illustration of women holding surf longboards

What size longboard is good for a beginner?

An easier ride for a beginner is a longboard that's fairly wide, with a little width in the nose; 23 inches wide and 9'6" in length is a great place to start. These dimensions provide a more stable platform when you're learning how to cross-step and noseride.

Measurement Beginner-friendly size
Length 9'6"
Width (center) 23 inches (a quarter to half an inch either way, depending on your height)
Nose 19 inches
Tail 15.5–15.75 inches

A 9'6" board is right in the middle when it comes to lengths, so you can go up or down from there as you develop your skills. A longer board will normally glide better, paddle easier and let you get around wave sections more effectively. But longer boards are also generally more difficult to maneuver, require more set-up time and are less responsive.

Bottom contour

The bottom form of the surfboard. A rounded bottom generally slows the board down; most noseriding longboards have a rounded bottom for this exact reason. However, these longboards will be concave (curved inwards) under the nose to help you speed up once you've transferred your weight forward.

Illustration of surfboard bottom contours
Source: Boardcave

Rails

The edges of the surfboard. Soft-edged, fuller rails don't dig in or sink into the wave; they're great for smaller, slower waves and smooth surfing.

Examples of surf longboard rails
Source: Boardcave

Harder-edged, low-volume rails are best for more advanced surfers, as they sink into the wave during a turn; they suit bigger, faster surfing and offer greater control.

Rocker

The bottom curve of the board from the nose to the tail. More rocker equals a slower but looser board, and less rocker (flatter) results in a faster board that's harder to turn.

Illustration of the kinds of surfboard rocker
Source: Outside Pursuits

Longboards with more rocker are generally designed for more advanced surfers and larger swell, while boards with less rocker work well for beginners in smaller surf.

Having only a little bit of rocker keeps more surface area on top of the water, making the board more suitable for slow, cruisy waves as opposed to steep, hollow waves. It also allows you to generate more speed when paddling and surfing.

So, there you have it, folks! Buying your next surf longboard should be a breeze. If you're keen to develop some fancy footwork, use this guide to help you choose your next longboard. You'll thank us for it later.

Ready for the line-up? Read our surf etiquette for beginner longboarders and our favorite longboard spots in Bali.

Longboarder in Ninefoot Studio surf swimwear in Bali

What to wear for longboarding

A board that fits you deserves swimwear that stays put while you learn to cross-step. These are the newest pieces from our collection:

Not sure which piece suits your surfing? Read our surf swimwear guide. All Ninefoot Studio surf swimwear is designed by surfers and made in Bali. Orders to the US ship locally from the US, with free US shipping on orders over $200.

FAQ: buying your first longboard

What size longboard should a beginner buy?

A board around 9'6" long and 23 inches wide is a great place to start, with about 19 inches in the nose and 15.5–15.75 inches in the tail. These dimensions give you a stable platform for learning to cross-step and noseride.

What type of longboard is best for beginners?

A soft top or a traditional log. Soft tops are buoyant, easy to paddle and softer when you fall, while logs are heavier and stable. High-performance longboards are made for more advanced surfers.

Is a PU or an epoxy longboard better?

It depends on what you like. PU boards feel snappy at first but become less lively with use. Epoxy boards are lighter and more durable, so they need fewer ding repairs, but many surfers find them too light for windy conditions.

What shape makes a longboard good for noseriding?

A flat, blunt nose and a squarer tail, plus a rounded bottom with concave under the nose. Tails that produce drag slow the board down and keep you in the sweet spot of the wave for longer.

How much rocker should a beginner longboard have?

Less is better when you start. A flatter board keeps more surface area on the water, paddles faster and suits slow, cruisy waves. More rocker is generally designed for advanced surfers and larger swell.

Updated November 2026 by Ninefoot Studio.

Size guide (body measurements, cm and inches)

EU size XS S M L XL XXL
US size 0/2 2/4 6/8 10 12 14
AU size 4/6 8/10 10/12 12/14 14 16
Bust 77–79 cm
30–31 in
82–85 cm
32–33.5 in
87–94 cm
34–37 in
95–99 cm
37.5–39 in
100–104 cm
39.5–41 in
105–107 cm
41.5–42 in
Waist 59–61 cm
23–24 in
64–70 cm
25–27.5 in
71–76 cm
28–30 in
77–81 cm
30.5–32 in
82–85 cm
32.5–33.5 in
86–89 cm
34–35 in
Hips 84–89 cm
33–35 in
89–93 cm
35–36.5 in
96–101 cm
38–40 in
101–105 cm
40–41.5 in
105–109 cm
41.5–43 in
109–113 cm
43–44.5 in
Height 147–165 cm
4'10"–5'5"
165–175 cm
5'5"–5'9"
167–177 cm
5'6"–5'10"
168–180 cm
5'6"–5'11"
169–180 cm
5'7"–5'11"
169–180 cm
5'7"–5'11"
Weight 41–45 kg
90–99 lb
45–54 kg
99–119 lb
54–61 kg
119–134 lb
61–70 kg
134–154 lb
71–74 kg
157–163 lb
75–82 kg
165–181 lb

Between sizes? Choose the size that matches your bust and hips. If you're between sizes and like a snug fit, we recommend sizing down: a surf suit should fit close to your body, because loose fabric can move and fill with water in the waves. If you have a long torso, size up. Not sure? Message us on WhatsApp and we'll help you find your fit.

How to take your measurements

How to measure bust, waist and hips

Bust: Measure around the fullest part of your bust, keeping the tape level and comfortable, not too tight.

Waist: Measure the narrowest part of your waist, a few centimetres above your belly button. Keep the tape snug but not tight.

Hips: Measure around the widest part of your hips, about 20 cm below the waist, keeping the tape horizontal.